מק"ט |
תאור |
תמונה |
עלות
יח'
בש"ח לכמות
עד
10
יח' |
AL127 |
נצנץ 12 לדים צבעני מתוכנת
כולל מוזיקה "יום הולדת שמח" |
|
89 |
AL026 |
קיט לב 18 לדים |
|
59 |
AL023 |
נצנץ 2 לדים מבריקים
3V
|
|
29 |
AL021 |
אשכולות מנצנצים
עם מ"מ 555
4.5-6V |
|
59 |
AL129 |
קוביה אלקטרונית - עם לחצן הפעלה
40*75 מ"מ
4.5-6V
|
|
75 |
AL019 |
USB לב
32 לדים עם חיבור
Specifications:
PCB size: 7.5*8.5cm |
|
99 |
AL017 |
נצנץ לב
3v |
|
69 |
AL116 |
נצנץ משטרה - כולל טרימר לקביעת קצב
הבהוב
9V |
|
79 |
AL013 |
אקולייזר אודיו אין 9V-12V |
|
69 |
AL101 |
אקולייזר אלחוטי עם 5 לדים
מבריקים 9V |
|
45 |
EL101 |
אקולייזר 6 לדים
אקולייזר בחיבור ישיר לרמקול ללא מתח חיצוני
6 לדים מודדים עוצמה , 10-30 וואט
ניתן לזיווד ע"י קופסא EL12
גודל לוח 4X2 ס"מ
• This is super V.U. circuit that is specially designed
for connecting directly with speaker without power
supply.
• It can be applied as other stardard
V.U. but lower cost.
• Its LEDs will display one by one
according to signal volume, and not all
splashing as other cheaper circuit.
• Easy application and durable and can
be applied with 10 - 30 Watt amplier.
• Recommended housing : EL12
• PCB dimensions : 2.0" X 1.0" |
|
32 |
EL102 |
אקולייזר 10 לדים דו כיווני
אקולייזר דו כיווני בחיבור
ישיר לרמקולים ללא מתח חיצוני
10 לדים מודדי עוצמה, 5-30 וואט
ניתן לזיווד ע"י קופסא EL02
גודל לוח 6X2 ס"מ
• 2 way V.U.Meter 10 LED circuit is
different from other circuitry having 2 directions of
each 5 LEDs splash.
• This circuit is specially designed for do not require
power supply and few components, easy application, low
cost and durable.
• Requires only fewer signals from speaker so no
response to signal volume.
• It can be applied with 5 - 30 Watt amplifier.
• Recommended housing : EL02
• PCB dimensions : 3.0" X 1.0" |
|
41 |
EL103 |
אקולייזר אל חוטי
• No wiring required so it reduces the
difficulty of installation.
• Have microphone as a receiver to pick up the sound.
• Then amplifier to VU meter set for showing the result
by LED.
• Power supply : 9 – 12V.
• Recommended housing : EL17
• PCB dimensions : 3.5” X 2.2” |
|
74 |
EL109 |
נצנץ 2 לדים עם ווסת לשליטה במהירות
• Has 2 LEDs splash alternately one by
one.
• Splashing speed is adjustable.
• Easily application with low cost.
• Power supply : 6 – 9 VDC.
• Recommended housing : EL03
• PCB dimensions : 1.4” X 1.2” |
|
32 |
EL110 |
מחליף אורות 3 לדים
• Different from other normal splashed
light circuit because LED will shut down one by one and
another one will display accordingly.
• Power supply : 6 – 9 VDC.
• Recommended housing : EL03
• PCB dimensions : 1.8” X 1.4” |
|
34 |
EL111 |
נצנץ 5 לדים עם ווסת שליטה
• LED of this circuit is alternately
displaying and stopping.
• It can be seperated into 2 sets : 3 LEDs and 2 LEDs.
each set will alternately work.
• Operating voltage : 9 VDC.
• Recommended housing : EL02
• PCB dimensions : 2.0" X 1.2" |
|
41 |
EL112 |
נצנץ 10 לדים עם ווסת שליטה
• LED flasher 10 dot circuit is one of
the flash light circuit which will be flashed on-off 5
dot per time and can control the speed.
• Recommended housing : EL03
• PCB dimensions : 1.1" X 2.1" |
|
46 |
EL113 |
נצנץ ערוץ אחד
220 וולט עד 700
ואט
• This splashed light circuit requires
220 VAC.
• One channel output can be easily connected with 220 V.
to 700 W.
• There also has variable resistance for splashing speed
adjustable.
• Recommended housing : EL01
• PCB dimensions : 2.0" X 1.3" |
|
70 |
EL114 |
נצנץ שני
ערוצים
W700
A
flashing circuit that can be connected directly to power
supply of 220VAC with two output channels and easily
connected to 220V electric bulbs up to max. 700W. each.
Flashing manner will be alternatively on and off at
interval. The circuit can be applied and used as
advertising media, warning lamps, party light decoration
and other light signs that require 220VAC
Power
supply : 220-240VAC.
- Load per channel : 230VAC, max. 700W.
- Adjust flashing speed with potentiometer.
- PCB dimensions : 2.28 x 1.42 in. |
|
90 |
EL115 |
אורות רצים 10 לד
מומלץ
• This circuit controls 10 LED to
display one by one alternatively.
• It can control running speed as per requirement.
• It is best for decorating in the car or any places.
• Recommended housing : EL03
• PCB dimensions : 2.7" X 1.5" |
|
48 |
EL116 |
אורות רצים 10 לד מעגל
• The LED running light circuit is
classified as one of beautiful decorations which be
lighted sequentially in circuit with a built-in speed
control available for the adjustment as well.
• Recommended housing : EL03
• PCB dimensions : 2.5" X 2.0" |
|
62 |
EL117 |
אורות רצים 6*2 לד
• Provides two 6-leds rows of
different color.
• Operating in sequential fashion.
• Power supply : 6 – 12V.
• Recommended housing : EL03
• PCB dimensions : 2.8" X 1.8" |
|
52 |
EL118 |
אורות רצים 16 לד
• Best for decoration.
• LED will display serially and turning around
adjustably.
• Power supply 9 – 12V.
• Recommended housing : EL04
• PCB dimensions : 3.1" X 2.1" |
|
78 |
EL124 |
תאורה אקסנון עבור רכב
• Requires direct voltage ( dc )
• Safety and application to automobile battery.
• It is suggested to use 12 volt flasher. 220 volt
flasher can also be used for low budget allocator but be
careful for safety.
• Recommended housing : EL03
• PCB dimensions : 2.3" X 1.7" |
|
104 |
EL126 |
סופר
רולטה
אלקטרונית 36 לד
A
super electronic roulette circuit that specially
designed as an enjoyable playing game at leisure and
applied for light decoration. All 36 LEDs will display
in a circular running like manner. LEDs will display
with high speed simultaneously when pressing switch and
slowly display until ended at any LED and soon after
will be off when releasing switch.
Technical specifications:
- Power supply : 9-12VDC.
- Consumption : 50mA max.
- Light indication : 36 LEDs, each 5 mm.
- PCB dimensions : 4.50 x 4.50 inch. |
|
95 |
EL127 |
רולטה
אלקטרונית 10 לד
An
electronic roulette circuit that specially desiqned as
an enjoyable playing game at leisure. It can be played
by one or more persons with setting digit number for
each LED, starting from 0 to 9. When pressing switch,
LED will be lit sequentially and move around with noise
coming out from speaker. LED will then slowly run down
and stop at any LED for a while and be off. For each
display, LED will not always stop at any particular LED
that look like a real roulette.
Technical specifications:
- Power supply : 9-12VDC.
- Consumption : 30mA max. @ 9VDC.
- PCB dimensions : 3.20 x 2.45 in. |
|
77 |
EL128 |
משחק אורות רצים
• Both LEDs will display alternatively
with high speed when pressing switch ,then output will
be stop at either LEDs.it is similar to head and tall
game.
• Power supply : 6 – 9 VDC.
• Recommended housing : EL03
• PCB dimensions : 2.2" X 1.4" |
|
45 |
EL129 |
קוביה אלקטרונית
• All 7 LEDs will flash at high speed
when the switch is activated,
• And will show only one led after the deactivated of
the switch.
• Power supply : 6 – 9 VDC.
• Recommended housing : EL04
• PCB dimensions : 3.8" X 1.8" |
|
76 |
EL130 |
אורות ריקוד 3 ערוצים
V220 2400W
• The dancing light device consists of
3 levels of frequency representing musical sound.
• Each channel can be connected with maximum 800 watt.
• Low and high voltage modules are divided as to prevent
an electrical shock that may take place.
• Power supply : 12 VDC.
• Recommended housing : EL04
• PCB dimensions : 3.7" X 2.8" |
|
299 |
EL133 |
אורות דיסקו
A disco flasher circuit that suits those
who are interested in electronics and used for light
decoration at night time. For an attractive and
beautiful display, it is recommended to use 3 red LEDs
and 3 green ones. They could be arrayed in green, red
and green for the upper row and in red, green and red
for the lower one. Or they can be laid differently from
above, depending on any required beautiful lookings.
Technical specifications:
- Power supply : 9-12VDC.
- Consumption : 30-57mA. max.
- PCB dimensions : 1.17 x 1.39 in. |
|
39 |
EL134 |
פלאש שני
צבעים
Two colour LED flasher circuit that can
be applied for multipurpose usings i.e. bicycle back
light, car radio antenna etc. It is easy to assemble as
this circuit requires only one LED but being
alternatively flashed in two colours. Flashing speed can
be adjusted as required by changing components.
Technical specifications:
- Power supply : 6-12VDC.
- Consumption : 12-15mA.
- PCB dimensions : 0.99 x 1.19 in. |
|
31 |
EL135 |
נצנץ 2 לדים צבעוניים
מומלץ
• Used LED 3 legs type, which resulted
2 color green and red.
• It needs 2 set of 3 legs LEDs to connect at each
opposite side to make different type of flash light.
• Power supply : 6 – 9 VDC.
• Recommended housing : EL03
• PCB dimensions : 1.3" X 1.2" |
|
33 |
EL137 |
משחק הלחצן המהיר
• It is the electronic circuit applied
for decision making e.g. Games as seen on TV which the
first player who presses the switch has the right to
answer.
• The light will shown at only that player stage ever
other players press the switch afterward
• Power supply : 9 VDC.
• Recommended housing : EL03
• PCB dimensions : 2.4" X 1.7" |
|
47 |
EL140 |
תאורת לדים חג המולד
• Purpose of using : Decorate
• 16 Blinking LEDs, which they are alternatively light
on.
• Power supply : 9V. Battery
• Recommended housing : EL04
• PCB dimensions : 2.6" X 4.1" |
|
71 |
EL141 |
נצנץ - לדים מבריקים
מומלץ
• The shape of display is outlined by
circle which is blinking continue.
• For practical application,. Such as showing product,
etc.
• Adjustable flashing speed with potentiometer.
• Power supply : 3 VDC.
• Recommended housing : EL02
• PCB dimensions : 1.2” X 1.8” |
|
49 |
EL142 |
תאורת רובוט
מומלץ
• The shape of robot face is outlined
by a series of green LED and yellow LED while the rest
of LEDs is blinking.
• Adjustable flashing speed with potentiometer.
• Power supply : 3 VDC.
• Recommended housing : EL01
• PCB dimensions : 1.8” X 1.8” |
|
46 |
EL143 |
תאורת גחלילית
• The fierfly light circuit is
flashing circuit at used to decorate for night, which is
flashing continue.
• The circuit is used to the lamp 3 volts for resemble
the firefly.
• Adjustable flashing speed with potentiometer.
• Power supply : 3 – 4.5 V. battery
• Recommended housing : EL03
• PCB dimensions : 1.7” X 1.0” |
|
49 |
EL144 |
6 תוכניות 4 ערוצים משחק אורות
• This circuit requires
12 Vdc.
• Its function can be switched for 6 types which are
firstly, light run from 1st to 4th ranking and then
return from 4th to 1st again after all lamp is light on.
• Secondly, light runs from 1st to 4th after all lamp is
light on.
• Thirdly, flash light runs between 1st , 3rd, and 2nd,
4th.
• Fourth, light runs from 1st to 4th and then return
from 4th to 1st again.
• Fifth, light runs from 1st to 4th ranking and then
return from 4th to 1st again after all lamp is light
off.
• Sixth, light runs from 1st to 4th ranking and restarts
at 1st ranking again.
• This circuit can connect 25-Watts bulb for 4 channels,
totally at 100-Watts maximum.
• Recommended housing : EL04
• PCB dimensions : 3.5” X 2.7” |
|
159 |
EL145 |
משחק יציבות היד וזריזות
• This circuit is the electronic
circuits at use the basic circuit to create.
• The matter is to pass a small wire loop through a
thread wire with a lot of bends and obstacles.
• The person, who touches the thread wire with the wire
loop, will have the beep tone continue.
• An interesting game for parties and for neverending
evenings.
• Power supply: 3VDC.
• Recommended housing : EL17
• PCB dimensions : 3.2” X 1.1” |
|
51 |
EL146 |
כוכב לדים
עם תוכניות
• Star burst
chasing light circuit is flasher circuit.
• The shape to the same firework with outlined by a
series of red LEDs.
• Adjustable flashing speed with potentiometer.
• Power supply : 9-12 VDC.
• Recommended housing : EL09
• PCB dimensions : 3.8” X 5.9” |
|
115 |
EL147 |
כוכב 11 לדים
• This star flasher circuit is flasher
circuit.
• The shape of 5 point star is outlined by a pararells
of red LED with LED alternatively blinking.
• Adjustable flashing speed with potentiometer.
• Power supply : 3VDC.
• Recommended housing : EL01
• PCB dimensions : 1.6” X 2.4” |
|
60 |
EL148 |
רמזור
• Traffic light 4 way 12 LEDs is
running light circuit.
• The shape is the same traffic light at the
intersection.
• This circuit is consist of 12 LEDs.
• Idea as light-shows for model construction etc.
• Power supply : 9-12 VDC.
• Recommended housing : EL03
• PCB dimensions : 1.3” X 3.6” |
|
71 |
EL149 |
חץ לדים
• This circuit is the chasing light
circuit.
• The shape is the same the big arrow.
• This circuit is consist of 21 LEDs.
• Idea as light-shows for model
construction, pointer of entrance or
exit, the turn light of car etc.
• Power supply : 9-12 VDC.
• Current consumption about 70 mA.
• Recommended housing : EL03
• PCB dimensions : 2.9” X 2.2” |
|
55 |
EL150 |
אורות רצים 7 לדים
• This circuit is the chasing light
circuit.
• The shape is same as atomic.
• This circuit is consist of 7 LEDs.
• Idea as light-shows for model
construction etc.
• Power supply: 9 VDC.
• Current consumption about 26 mA.
• Recommended housing : EL03
• PCB dimensions : 1.8” X 2.3” |
|
46 |
EL151 |
אורות רצים 35 לדים
• This circuit is the chasing light
circuit.
• This circuit is consist of 7 LEDs.
• Idea as light-shows for model
construction etc
• Power supply : 9-12 VDC.
• Current consumption about 70 mA.
• Recommended housing : EL03
• PCB dimensions : 1.8” X 3.2” |
|
57 |
EL152 |
לדים מגן דויד
• This circuit is the flasher light
circuit.
• The shape is 2 triangle to overlap .
• This circuit is consist of 6 LEDs.
• Adjustable flashing speed with
potentiometer.
• Idea as light-shows for model
construction etc.
• Power supply : 9 VDC.
• Current consumption about 15 mA.
• Recommended housing : EL03
• PCB dimensions : 1.6” X 2.2” |
|
47 |
EL153 |
שבשבת לדים
• This circuit is the running light
circuit.
• The shape is the same to the propeller.
• This circuit is consist of 25 LEDs.
• Adjustable running speed speed with
potentiometer.
• Idea as light shows for model
construction etc.
• Operating voltage : 9 - 12 VDC.
• Current consumption about 45mA.
• Recommended housing : EL04
• PCB dimension : 2.9" X 2.7" |
|
75 |
EL154 |
שעון חול אלקטרוני 22 לדים
• This circuit is the running light
circuit.
• The shape is the same to sandglass.
• This circuit is consist of 22 LEDs.
• Adjustable running speed with
potentiometer.
• Idea as light shows for model
construction etc.
• Operating voltage : 9 - 12 VDC.
• Current consumption about 80 mA.
• Recommended housing : EL04
• PCB dimensions : 2.7" X 4.3" |
|
115 |
EL155 |
קופידון לדים
• This circuit is the chasing light
circuit.
• The shape is same the heart & arrow.
• This circuit is consist of 32 LEDs.
• Idea as light-shows for model
construction, Say Love to boyfriend or
girlfriend etc.
• Operating voltage : 9 VDC.
• Current consumption about 40mA.
• Recommended housing : EL03
• PCB dimensions : 2.5" X 3.4" |
|
55 |
EL156 |
מיני רמזור
מומלץ
- This circuit is the chasing light
circuit.
- The shape is like the traffic light at the
intersection.
- This circuit is consist of 3 LEDs.
- Idea as light-shows for model construction etc.
- Power supply: 9-12VDC.
- Consumption: 16mA max.
- Dimension of LED : 5 mm. (red, yellow and green)
- Dimensions of PCB : 1.07 x 2.39 inches |
|
42 |
EL157 |
אורות רצים 10 לדים 2 צבעים
- This circuit is the chasing light
circuit.
- The light is chasing separate from the center (green
colour) and return to center (red colour).
- This circuit is consist of 3 LEDs of 5 mm. tri-LED.
- Idea as light-shows for model construction etc.
Technical specifications:
- Power supply: 9-12VDC.
- Consumption: 15mA max.
- LED : 5 mm. (tri-LED, red and green)
- Chasing speed : adjustable
- Dimensions of PCB : 2.90 x 1.82 inches |
|
77 |
EL158 |
תאורת
אקסנון 220
וולט
- This circuit is the flashing light
circuit to trigger a high xenon flashtube using 220 to
240 VAC input from a power supply.
The flashrate is fixed but you can change the value of
capacitor later on.
- Idea as flashing light effects for discotheques etc.
Technical specifications:
- operating voltage: 220 to 240VAC.
- flash rate: 2 flashes/second
- dimensions of PCB : 1.69 x 2.52 inches |
|
115 |
EL159 |
קובית אלקטרונית
- This circuit is the
chasing light circuit.
- After knocking the PC-board, this circuit shows at
random chosen numbers between 1 to 6.
- This circuit is consist of 7 LED's of 3 mm.
- Idea as party etc.
Technical specifications:
- Power supply: 9-12VDC.
- Consumption: 24mA max. @ 12VDC.
- LED indication : 7 LED's, each 3 mm.
- Sensitivity of shock sensor : adjustable
- Dimensions of PCB : 1.89 x 1.67 inches per PCB |
|
75 |
EL160 |
משחק מספר אקראי
- This circuit is a board game provide
an excellent source of pleasant and healthy
entertainment.
- It is ideal to use for funny party.
- They include a 1 digit (0.5 inch high).
Technical specifications:
- Power supply : 9-12VDC.
- Consumption : 42mA max. @ 9VDC.
- Display : 1 digit (0.5 inch 7-segment LED)
- PCB dimensions : 2.22 x 2.63 inches. |
|
57 |
EL161 |
אורות רצים 14 לדים
- This is a feeling LED flasher which
is a small side.
- The shape of this circuit is the same smile and sad of
face.
- Idel for decorations in party or room etc.
Technical specifications:
- Power supply : 9-12VDC.
- Consumption : 30mA max.@ 9VDC.
- Display : 14 LED's (12LED's@ 3 mm., 2 tri-color LED's@
5 mm.)
- PCB dimensions : 1.88 x 2.66 inches.
- Recommended Housing : EL17 |
|
47 |
EL162 |
אורות רצים 31 לדים
- This circuit is the chasing light
circuit.
- The shape is like the saturn.
- This circuit is consist of 31 LEDs.
- Idea as light-shows for model construction etc.
Technical specifications:
- Power supply : 9-12VDC.
- Consumption : 67mA max.@ 9VDC.
- Display : 31 LED's (each 3 mm., 17 green LED's and 14
red LED's)
- Dimensions of PCB : 2.28 x 2.66 inches
- Recommended Housing : EL17 |
|
51 |
EL163 |
אורות רצים 31 לדים
- This circuit is the chasing light
circuit.
- The shape is like the saturn. This circuit is consist
of 31 LEDs.
- Idea as light-shows for model construction etc.
Technical specifications:
- Power supply : 9VDC.
- Consumption : 21mA max.
- Display : 31 LED's (3 mm., 7 LED's and 5 mm., 3 LED's)
- Dimensions of PCB : 3.17 x 3.27 inches
- Recommended Housing : EL04 |
|
49 |
EL164 |
תאורת פלאש אקסנון לדיסקוטק
- Flashing light effects for
discotheques, etc.
- Can be adjustable for flash frequency.
Technical specifications:
- Power supply: 220-240VAC.
- Adjustable speed of flash with potentiometer.
- There is the switch start for test the circuit.
- PCB dimensions : 2.02 x 2.68 inches.
- Recommended Housing : EL23 |
|
162 |
EL165 |
תאורת פלאש אקסנון רגישה לקול
- This circuit is the flashing light
circuit.
- Whenever there is any sound, the circuit will work,
and if the any sound stops, the circuit will not work.
Technical specifications:
- Power supply: 220-240VAC.
- Adjustable sensitivity of detect the sound with
potentiometer.
- There is the switch start point for test the circuit.
- PCB dimensions : 2.01 x 3.08 inches.
- Recommended Housing : EL03 |
|
162 |
EL166 |
תאורת פלאש אקסנון נשלטת
- This circuit is the flashing light
circuit.
- Whenever there is light, the circuit will work, and if
there isn't light, the circuit
will not work.
Technical specifications:
- Power supply: 220-240VAC.
- Adjustable sensitivity of detect light with
potentiometer.
- There is the switch start point for test the circuit.
- PCB dimensions : 2.01 x 3.08 inches.
- Recommended Housing : EL23 |
|
173 |
EL167 |
גחלילית עם חיישן לילה
מומלץ
- The firefly light circuit is
flashing circuit which is activated at night.
- This flashing of light is like firefly light in the
nature.
- The circuit will be working when LDR isn't detecting
the light.
- Ideal as light-shows for model construction etc.
Technical specifications:
- power supply : 3VDC.
- consumption : 0.2mA (standby), 11mA (working)
- light sensor : LDR
- PCB dimensions : 1.06 x 1.21 inches.
- Recommended Housing : EL01 |
|
51 |
EL168 |
שלט העישון אסור
- The no smoking flasher circuit is a
small and flashing circuit.
- It circuit is designed a no smoking signs.
- The display can be divided into two sections; The
prohipition symbol LEDs is blinking and cigarett LEDs is
light on but smoke of cigarett will be slowly light on
andlight off. Ideal as light-shows for model
construction etc.
Technical specifications:
- power supply : 9-12VDC.
- consumption : 80mA max. @ 9VDC.
- PCB dimensions : 3.54 x 3.50 inches.
- Recommended Housing : EL05 |
|
109 |
EL169 |
רובוט מרקד 33 לדים
- This dancing robot flasher circuit
is a basic circuit that is suitable for those who
interested in electronic.
- Easily application with low-price. This circuit has
LEDs splash alternately one by one.
Technical specifications:
- power supply : 9-12VDC.
- consumption : 60mA max. @ 9VDC.
- light indication : 33 LED's each 5 mm.
- PCB dimensions : 2.83 x 3.96 inches.
- Recommended Housing : EL05 |
|
58 |
EL170 |
שלט סכנה 46 לדים
- The danger flasher circuit is a
small and flashing circuit.
- It circuit is designed a danger signs. It can be
intall around danger zone for protect everybody.
Technical specifications:
- power supply : 9-12VDC.
- consumption : 80mA max. @ 9VDC.
- PCB dimensions : 3.50 x 3.63 inches.
- Recommended Housing : EL05 |
|
87 |
EL171 |
פלאש שתי נורות
- This two lamp flasher circuit is a
basic circuit that is suitable for those who interested
in electronic.
- Easily application with low-price.
- This circuit has LAMP's splash alternately one by one.
Technical specifications:
- power supply : 3VDC.
- consumption : 300mA max.
- light indication : 2 small bulbs 3 volts
- PCB dimensions : 1.68 x 1.06 inches.
- Recommended Housing : EL01 |
|
46 |
EL172 |
נצנץ 19 לדים 3 שלבים
- The three step flasher circuit is a
small and flashing circuit.
- 19 LEDs for 3 steps blinking circle from internal to
external.
Technical specifications:
- power supply : 9-12VDC.
- consumption : 40mA max. @ 9VDC.
- PCB dimensions : 2.69 x 3.56 inches.
- Recommended Housing : EL04 |
|
80 |
EL173 |
נצנץ 23 לדים
- This circuit is the flasher light
circuit. The shape is like the halloween pumpkin.
- Idea as light-shows for model construction etc.
Technical specifications:
- power supply : 9-12VDC.
- consumption : 45mA max.@ 9VDC.
- display : 23 LED's each 5 mm.
- dimensions of PCB : 2.83 x 3.96 inches
- Recommended Housing : EL05 |
|
57 |
EL174 |
שלט לבניה 5*7 לדים
- This circuit is the chasing light
circuit.
- It can be setting the pattern by yourselves.
- It has three function for displaying: chasing from
right to left, chasing from left to right and chasing
from right to
left and left to right alternately.
Technical specifications:
- power supply : 3-5VDC.
- consumption : 85mA max.@ 3VDC.
- display : 5x7 dot matrix LED's each 5 mm.
- it can be created displaying by your idea.
- long of displaying : not more than 48 columns and 5
rows.
- dimensions of PCB : 2.83 x 3.96 inches
- Recommended housing : EL05 |
|
193 |
EL175 |
נצנץ ג'מבו
שני לדים ענק
• A basic blinking light
circuit that suits those who are interested in
electronics.
• Easy to assemble and to understand with few components
and low cost.
• 2 LEDs will alternatively blink and blinking speed is
adjustable.
• Power supply: 3 VDC.
• Consumption: 14 mA. max
• Adjust blinking speed with trimmer potentiometer.
• PCB dimensions: 1.39 x 1.27 in.
• Recommended housing: Future Box (EL03) |
|
47 |
EL176 |
אורות רצים
לצדדים
• Two direction running
light circuit that used for light decoration or as a
third breaking light.
• LEDs will run from the center outwards to both sides
and running speed is adjustable.
• Power supply: 9-12 VDC.
• Consumption: 80 mA. max@12 VDC.
• Adjust running speed with trimmer potentiometer.
• Display: 15 LEDs
• PCB dimensions: 3.87 x 2.48 in.
• Recommended housing: Future Box (EL04) |
|
115 |
EL177 |
נצנץ לב כפול
50 לד
A two hearts shaped flasher circuit that
used for light decoration. Blinking manner will start at
the first heart shaped LEDs and then the second one,
followed by the arrow shaped LEDs piercing at them.
Technical specifications:
- Power supply: 9-12VDC.
- Consumption: 25mA max. @ 12VDC.
- Adjust blinking speed with trimmer potentiometer.
- Display : 46 LEDs
- PCB dimensions : 4.60 x 3.29 in. |
|
57 |
EL178 |
שני צעדים
אורות דיסקו 18 לד
A
two step disco light circuit that used for light
decoration. Blinking manner can be self-adjusted by
connecting to the jumper. Moreover, blinking speed can
also be adjusted starting from a very slow to faster
speed.
Technical specifications:
- Power supply: 9-12VDC.
- Consumption: 42mA max. @ 9VDC.
- Adjust blinking speed with trimmer potentiometer.
- PCB dimensions : 2.33 x 2.69 in. |
|
86 |
EL179 |
אורות אזהרה
20 לד
A warning flasher circuit
uses for light decoration and warning signs at various
places. Flashing speed can be freely adjusted whether it
flashes or not. Moreover, the flashing can be changed
into 2 different charactors.
Technical specifications:
- Power supply: 110/220VAC.
- Adjust flashing speed with trimmer potentiometer.
- Flashing charactor : 2 types.
- PCB dimensions : 3.34 x 3.30 in. |
|
104 |
EL180 |
רובוט פלאש 7
לדים
A basic light flashing circuit that suits
those who are interested in electronics. Easy to
assemble, to understand and low cost with only a few
components. The circuit is good for decoration at
parties.
Technical Specifications:
- Power supply : 9VDC.
- Consumption : 65 mA. max.
- PCB dimensions : 2.29 x 1.11 in. (PCB circuit)
1.13 x 1.11 in. (PCB head
and leg)
|
|
47 |
EL181 |
טסטר צליל 10 לד
A
basic sound power testing circuit that used for
measuring of preliminary sound power and sound level
which do not require precision or as a sound power
testing game.
Technical Specifications:
- Power supply: 9VDC.
- Consumption : 20mA. (stand by), 50mA. (working)
- Adj. sensitivity : trimmer potentiometer.
- PCB dimensions : 2.29 x 1.11 in. |
|
101 |
EL182 |
AVR
קיט ללמידה מיקרוקונטרולר
This
basic circuit is suitable for learners who are
interested in AVR microcontroller. The circuit has been
designed to be used with both input and output ports as
well as ISP AVR programming port, easily to be conducted
for testing. Apart from being used for education, the
circuit is also applied for decoration activities.
Technical Specifications:
- Power supply : 9-12VDC./max. 60mA.
- Output LED : 12 LEDs.
- Chasing light pattern : 16 programmes, selectable.
- Chasing speed : adjustable.
- PCB dimensions : 3.25 x 1.95 in |
|
137 |